Because the system had a past or has a current electrical problem sensed that the airbag module commanded the idiot light on for the customer to bring it into service . You need pull codes, test, find cause, and repair the problem.
 Even if you were so kind as to post the codes so others can actually mention possible causes, there are pinpoint tests that need to be done to diagnose the codes.

According to your fault codes..............................(Crash Recorded in 1st Stage Only(Frontal-Replace SRSCM)....................... it looks like this Vehicle has had an Accident Damaged.......................therefore you will have to replace the Airbag Module or, find some body who can clear the Crash Data for you.........

 

                  Ashraf is exactly right about direction to go there are companies that do clear crash data but need to check if capable. Other codes may or may not be valid as certain repairs might have been done already. Need to get a cleaned or new box installed properly first then work on what codes new module sees now that the information is current and valid. Happens all the time by shops and/or individuals they replace some obvious deployed parts then stop when box needs replacement or cleaning with possible programming.

Ashraf how to clear crash data please can u guid us how to do it

Ashraf how to clear crash data please can u guid us how to do it

 Hi
You will need a programmer tool for that or the best way is to fine a used module with same part numbers and same model.............................